IPM OP232C Transfer Pump Fluid Section Repir kit 601035

$ 69.98



IPM 02 CS



Spray Foam, Coatings and Spray On Bedliner Contractors!


Here is another deal for you from Professor Foam!   

  

This is an auction for an IPM OP-232C Transfer Pump Fluid Section Repair Kit.

IPM Part Number 601035


 Download the Manual Here

 

 

Here is more information on the OP-232C



IPM Transfer Pumps deliver with reliability in their design and diversity in their capabilities

The OP-232C is designed specifically for difficult to handle materials. The immersed lower pump, tie-tubes, and sealing bung bushing allow quick drum change without exposing the system to cotamination or moisture.
  • Fully air operated
  • 2 ball piston design provides uniform positive displacement
  • Extremely durable pump with long life packings
  • Specially designed piston seals do not come into contact with material pumped.
  • Hence, very long life as it can handle highly problematic fluids like Isocyanates which crystallizes on piston rods upon contact with moisture in air and rupture seals
 

 

Consistent feed pressures and flow rates for consistent results

  1. Large air motor and lower assembly provide 2 1/2 times the flow of transfer based 2:1 pumps
  2. Quick release bung bushing allows fast slip-in/slip-out drum change. No need to disconnect hoses and rotate pump. Sealed design provides moisture barrier.
  3. "Tie-Tube" design allows above-the-drum fluid outlet with immersed lower pump
  4. Full length wet cup prevents material from hardening on rod stroke area while changing drums. Extends seal life.
  5. Immersed lower pump assembly maintains wetted rod and seal area, preventing material from hardening. Extends rod and seal life.

 


Ratio 2:1
Maximum Output - continuous 5.0 gpm (28.4 lpm)
Maximum Output - intermittent 7.5 gpm (18.9 lpm)
Maximum input air pressure 180 psi (12 bar, 1.2 MPa)
Maximum output fluid pressure 360 psi (24 bar, 2. MPa)
Maximum ambient temperature 120°F (50°C)
Maximum fluid temperature 190°F (88°C)
Weight 26.1 lb (11.9 kg)
Dimensions 50 in (127 cm) length

Giving the ability to handle a range of applications IPMs Transfer Pumps are some of the most flexible in the market today.

Feeding

  • Use it as a means to feed two or more fluid components from a container to a proportioning machine. The pumps are directly inserted into the drum. All you need is an air line to drive the pumps. Simple.

Fluid Transfer

  • Use it as a means to transfer fluid of various viscosities from a container.
  • Wide range of pump ratios to choose from for various fluid viscosities.

Circulate

  • Use as means to circulate paints or other fluid mediums
  • Wide range of pressure ratios to suit various viscosities
  • Driven by just one compressed air line
  • Explosion proof

Spray Applications

  • Conventional Air Spray
  • HVLP Air Spray
  • Air-Assisted Airless Spray
  • Airless Spray

IPM Transfer Pumps

IPM IP-02 Transfer Pumps 

IPM Transfer Pumps IPM's 100 Series 2:1 is designed specifically for difficult to handle materials.

The immersed lower pump, tie-tubes, and sealing bung bushing allow quick drum change without exposing the system to contamination and moisture.

New Designs for:

  • Higher Viscosities
  • Ease of Cleaning
  • Fluids with 245a Agent
  • Low Ceiling Installations
  • Interchangeable Pump Lengths

New design innovations to simplify handling and application of polyurethane, polyurea, and other two component materials.

New design for cleanable tubes

  •  Allows thorough cleaning of the pump fluid tubes.
  • Both the IP02 and the OP series have easily cleanable fluid tubes.
  • Feature allows for nearly an unlimited number of pump rebuilds.

 

IP and OPC Series Pumps now have high viscosity “B” resin capabilitiesIPM 2:1 Transfer Pumps

  • “B” resins with the newer 245fa blowing agent can have viscosities up to 2000 cPs.
  • OP and IP series pumps have increased suction capability by 69%.
  • Pumps have the capability of pumping the new “B” resins without heat or pressurization.
  • The new design nearly eliminates foaming of the material.
  • Outlet ports are now a standard ¾” NPT.

 

Features

  • Fully air operated
  • 2 ball piston design provides uniform positive displacement
  • Extremely durable pump with long life packing
  • Specially designed piston seals do not come into contact with material pumped.
  • Hence, very long life as it can handle highly problematic fluids like Isocyanates which crystallizes on piston rods upon contact with moisture in air and rupture seals.

 

 

IP-02

Pressure Ratio:
  2:1
Max. fluid flow:
  2.5gpm (9.5 lpm)
Air motor diameter:
  1.4" (3.6cm)
Air inlet pressure range:
  30 - 180 psi (2 - 12 bar)
Max. fluid pressure:
  360 psi (24 bar)

Air inlet size:

  1/4" npt (f)
Fluid inlet size:
  3/4" npt (m) (Stubby)
Fluid outlet size:
  3/4" npt (f)
Rod and cylinder
  CS & SST
Throat packing:
  Teflon
Piston packing:
  Teflon

Length (Drum length):
(stubby):

  50" (1270 mm)
  30.2" (768 mm)
Weight:
  16.1 lb (7.3 kg)
  14.1 lb (6.4 kg

I can get this overnighted to you, call me for a quote.

I will ship this international, please call me for a shipping quote

 

Ok if you want more information drop me a line..

 CALL TODAY!  318-880-7787 its my cell phone or go to my store professorfoam.com

Thanks!

5 Star Satisfaction

Please take a few minutes to review the item you have purchased once you receive it, and then logon to your account to leave us a 5 star rating. Anything less than 5 stars we consider a failure on our end, so if you are not completely satisfied with this item after receiving it, please contact us at professorfoam@gmail.com

and tell us why BEFORE you leave us feedback so we can make it right.

Buy with confidence, we take customer service seriously, and we always take care of our customers!

 

   

We DO ship internationally, even to Canada!  We ship internationally because we can communicate, and we are able to meet the needs of non-English speaking individuals.  We pride ourselves on good customer service, and it is possible for us to meet the level of customer service we pride ourselves on when dealing with international customers.

Thank you for looking at our eBay items, we hope to have the opportunity to prove to you why we have earned our great feedback through same day shipping to support after the sale. Have a great day!

 





Attention all Florida Customers!!!

USPS has long delays on First Class Letter shipments. They have been taking 14 days or longer for delivery to the Central and Southern parts of the state, If you want to receive your item faster please upgrade the shipping to First Class Parcel or Priority mail, then you will have a tracking number and much faster delivery time.
Thank you.


On Dec-22-13 at 17:09:54 PST, seller added the following information:

Every buyer gets a MyStoreRewards invitation for cash back